blue flashing light on night owl doorbell

Blue flashing light on night owl doorbell code#

The camera will calculate the amount of light available, make a choice for the best image based on this, and swap to either color or a crisp monochrome image. This is dependent however on the amount of ambient light present in the field of view. After installing the batteries, ALL LED's turn ON for 3 seconds. Color Night Vision - The Abode Video Doorbell carries a night time color feature. If the Motor Rotor works properly, all of the LED's remain OFF. After 5 unsuccessful attempts, the Safe locks the keypad for 1 hour. Safe Motor Rotor Check When the Safe powers on after installing the batteries, the BLUE LED light blinks slowly twice, the motor spins and performs a self-check to ensure the Motor Rotor works properly.

Blue flashing light on night owl doorbell code#

Entering the wrong Access Code turns the RED LED on, and the Safe beeps continuously for 3 seconds.Entering the correct Access Code turns the YELLOW LED OFF and opens the Safe.When entering the Access Code, a YELLOW LED turns ON as you press each key.The Safe can still be opened using the key. Note: If the batteries voltage gets too low, the Motor Rotor can get stuck and the Access Code might not open the Safe. If the issue still exists after repeating this process, please contact our Technical Support Team for further assistance.Someone has pressed the doorbell button and its waiting for someone to respond. If the problem still persists after replacing the batteries, remove the batteries and wait 15 seconds before reinstalling the batteries to test the Motor Rotor. Doorbell button pressed and waiting for owners response.Replace the batteries with new AA batteries to test the Motor Rotor.If after 3 seconds only the RED LED remains ON, the Motor Rotor did not work correctly. If the Motor Rotor works properly, all of the LED's remain OFF.Īfter installing the batteries, ALL LED's turn ON for 3 seconds. When the Safe powers on after installing the batteries, the BLUE LED light blinks slowly twice, the motor spins and performs a self-check to ensure the Motor Rotor works properly. The BLUE LED light blinks slowly twice, then blinks rapidly for a few seconds and within a minute the YELLOW and RED LED's turn solid for 3 seconds.The BLUE LED light blinks slowly twice and within a minute, the BLUEand RED LED's turn solid for 3 seconds.

If the Safe has the latest firmware: The BLUE LED light links slowly twice and no other LED's light up.

Note: The Safe must be connected to the Night Owl Safe App to perform a Firmware check.

Every time you change the batteries in the Safe, the Safe will check for new Firmware.